2015 Land Pride HRL3578

Call for Price

Land Pride



The HR35 Series Retractable Box Scrapers meet dirt moving and soil contouring needs of landscapers, contractors, nurseries, sod growers, farmers, ranchers and municipalities. Soil contouring productivity is dramatically increased with utilization of the hydraulically controlled retractable scarifier. The front blade mounted on the moldboard is ideal for soil redistribution and soil leveling. A second blade mounted on the hinged rear gate further enhances the ability of the Box Scraper to redistribute and level soil. Both the front and rear blades are replaceable and can be flipped over to extend blade life. The HR35 is used for finishing and fine grading when the hinged rear gate is bolted in place. Unbolt the rear gate and the unit’s front blade will penetrate deeper into the soil. Place the tractor in reverse and the rear blade can be used to backfill.

  • 1/2” Heavy Side panels-Thick end panels guard against abrasion.
  • 3 Position heat treated spring steel shanks-Positions set for deep to shallow settings. Heat-treated for longevity.
  • Category I & II 3-point hitch-Fits a wide variety of tractors.
  • Clevis-type lower 3-point hitch-Allows for easier hook-up of the tractor’s lower draft arms.
  • Heat treated dimpled on tips-Easy to replace tips that are heat treated for toughness.
  • Heat-treated, reversible and replaceable cutting edges-Heat-treated for hardness. Reversible so both edges can be used before replacing the cutting blades.
  • Heavy Shank bumpers-A 3/4” square steel bumper is located behind each shank for additional reinforcement.
  • Hinged rear backfill blade. Fixed or floating-Rear backfill blade can be in float or fixed position. For packed down grade, level grade or rough grade
  • Hydraulic shank tube-Hydraulic shank tube makes for efficient use of time.
  • Knurled bushings in upper and lower hitch-Work done with retractable box blades is done forwards and backwards. Bushings at hitch points eliminate premature wear
  • Roll-formed moldboard-Roll-formed moldboard keeps materials flowing which puts less drag on the Box Scraper, resulting in lower HP requirements and faster working conditions.
  • Transport lock on shank tube-Heavy-duty shank lock to keep shanks locked into place during transport.
  • Max HP: Rating-65 HP
  • Capacity: 26 cu. ft.
  • Depth: of Bucket-28”
  • Side: Panels-1/2” thick x 19” high x 30” deep
  • Weight: 972 lbs. ; With hydraulics-981 lbs.
  • Working Width: 78"
General Information
  • 3-Point Hitch: Construction-Harden bushings in upper and lower hitch points/Type-Category l & II
  • Beam: Shank-Pivots to lift shanks up; transport lock on shank tube
  • Cutting: Blades-2 ea. 1/2” x 6” high carbon, heat treated cutting edges; reversible and replaceable
  • Lift: Mechanism-Hydraulic cylinder
  • Number of Shanks: 8
  • Other: Moldboard-Roll-Formed Moldboard -17”
  • Shanks: Material-3/4” x 2 1/2” heat treated spring steel ; Penetration-3- positions (1”, 3” & 5” below scraper end plates) ; Tip Construction-Replaceable heat treated dimpled-on tips
  • Warranty: Overall Frame: One year Parts and Labor/Shanks: Considered wear item (see complete Warranty Statement).



Cutting Width

Related Products