2015 Land Pride RC3614

Call for Price

Land Pride



The RC3614 and RCM3614 Series Rotary Cutters provide excellent cutting performance on gently sloping or slightly contoured right of ways, pastures, and set-aside-acres. The 14' cutting width, 2" to 12" cutting height and ability to cut weeds and brush up to 2" in diameter make them well suited for these applications. Both models offer pull-type self-leveling clevis hitches for attachment to 70-160 HP tractors.

The RC3614 and RCM3614 cutters offer Cat. 6 main input drivelines for attachment to 540 rpm or 1000 rpm tractors. They also offer various hitch and tire options making them an excellent choice for agricultural, airport, and municipal mowing applications.

  • 1" Solid hinge rod-Larger diameter hinge gives greater strength to cutter and hinge area.
  • 1/4" side skirt-Reduces debris piercing possibilities.
  • 10 Ga. stump jumper backed with a 1" x 4 1/2" thick blade mounting bar-Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions.
  • 10 gauge smooth deck top-Reduces accumulation of debris and is easier and faster to clean.
  • 13" Deck height-Handles heavy cutting, which reduces balling-up of cut material under the deck.
  • 2 or 4 Plate slip-clutch-Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
  • 2" Output gearbox shaft-Large output shaft handles shock loads better.
  • 250 HP divider gearbox; 130 HP center & wing gearboxes-A rugged heavy-built gearboxes capable of handling heavy-cutting applications.
  • 5-Bolt hubs-5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • 6" Blade overlap-Eliminates skipping during turns.
  • 7 Year gearbox warranty*-Shows confidence in gearbox integrity.
  • 7/8" Leveling rods-Large diameter leveling rods provide superior supporting strength over rough terrain.
  • Drain holes in wheel rims-Allows water to drain from wheels mounted on the folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
  • Easy Greasable drivelines-Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
  • Enclosed front to rear dual leveling rods-Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
  • Factory assembled-Saves customer set-up time and money. Adjustments should always be made by dealer.
  • Gearbox Seal Protection-Gearbox bottom seal protection for longer bearing life.
  • Good cutting capacity - Can cut brushy areas with saplings up to 2".
  • High blade tip speed-Allows clean cutting of material & even distribution. See Specifications for actual FPM.
  • Hinged wing section-Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • Input driveline: Cat. 6 CV or Cat. 5 Conventional - Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Rephasing lift cylinders-Allows cutter to be leveled using hydraulic cylinders verse mechanical turnbuckles.
  • Replaceable wheel spindles-Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
  • Self-leveling hitch-Reduces drawbar wear by keeping hitch level while going through ditches.
  • Spindle Nut Protected-Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects.
  • Spring-cushioned center axle-Protects unit from bumps and ground shock, cushions loads on drawbar.
  • Surpassed rugged industry standards-All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
  • Wing transport lock-Holds transport wing in the folded-up position in case of hydraulic pressure loss.
  • Horsepower: (PTO)-70 to 160 HP ; (Gear Box)-250 HP Splitter/130 HP Center & Wing
  • Driveline: (Input 540 & 1000 PTO) - ASAE Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint ; (Intermediate & Wing)-Cat. 4 with slip-clutch or optional Cat. 5 with slip-clutch
  • Gear Box: (Oil Capacity)-5.18 Pints: Divider Gearbox/6.76 Pints: Center deck, LH deck & RH deck spindle gearboxes ; (Lubrication)-Gear Lube 80-90W EP
  • Axle: (Fasteners)-1 1/4" Greasable pins ; (Hubs)-Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
  • Blade Tip Speed: 16,500 FPM
  • Cutting Capacity: 2"
  • Deck Height: 13"
  • Overall Length: 17' - 6" (With cutting height at 2")
  • Overall Width: 14' - 8"
  • Transport Width: (Minimum)-9' - 2 1/2" (With cutting height at 2")
  • Weight: (Machine)-Chain guards, 5 AC tires and standard clevis. ; (Hitch)-2,220 lbs. ; (Total)-5,620 lbs.
General Information
  • Cutting Height: 2" to 12"
  • Cutting Width: 13' - 6"
  • Deck Material: 1 - Piece, 10 gauge. ; (Side Skirt Material)-1/4" plate.
  • Hitch: (Types)-Standard Clevis Hitch, Double Swivel Clevis Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch ; (Jack)-Standard (7,000 lbs.)
  • Lift: (Hydraulics)-(Center Deck)-3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers. ; (Right Wing)-3" x 8" Rephasing hydraulic cylinder with hoses & fittings.
  • Number of Blades: (4) (2 per Carrier)-1/2" x 4" Heat Treated Free Swinging Alloy Steel with up lift. ; (Overlap)-6" ; (Bolt)-Keyed with hardened flat washer & lock nut. ; (Stump Jumper/Blade Holder)-10 Gauge round dish shaped pan, reinforced with 1" x 4 1/2" blade mounting bar.
  • Skid Shoe: (Weight Box)-Reversible & replaceable. ; (Wing Deck)-Reversible & replaceable. ; (Center Deck)-2 Replaceable shoes.
  • Standard: (Hitch)-Clevis Hitch ; (Jack)-7,000 lbs. ; (Transport Axle)-Spring-cushioned on center transport axle.
  • Warranty: Overall Unit and Driveline: One year Parts and Labor/Gearbox: 5 years on Parts and Labor/Hydraulic Cylinders: One year Parts and Labor/Hoses and Seals: Considered wear items/Blades, tires and driveline friction discs: Considered wear items (see complete Warranty Statement).
  • Wings: (Folding Hydraulics)-3" x 12" single-acting hydraulic cylinder complete with hose & fittings. ; (Flex)-45 degrees up, 20 degrees down while cutting.



(Machine)-Chain guards, 5 AC tires and standard clevis. ; (Hitch)-2,220 lbs. ; (Total)-5,620 lbs.
Recommended HP
(PTO)-70 to 160 HP ; (Gear Box)-250 HP Splitter/130 HP Center & Wing

Related Products