2015 Land Pride RC3615

Call for Price


Availability
Brochure
Year
2015
Manufacturer
Land Pride
Model
RC3615

Overview

Description

Land Pride's RC3615 and RCM3615 Series Rotary Cutters are ideal for maintaining grazing areas for horses or mowing the wide open spaces close to town. The 15' cutting width and ability to cut weeds and brush up to 2.5" in diameter make them well suited for these applications. The 36 Series offers a pull-type self leveling tongue with a clevis hitch for attachment to 50-160 hp tractors. Safety guards around the cutter are offered in either chain or rubber.

Features
  • 1" Solid hinge rods - Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
  • 1/4" Sidewall thickness - Increased thickness reduces damage from objects being thrown into deck sidewalls.
  • 160 HP Divider gearbox and 110 HP wing gearboxes-A rugged heavy built gearboxs capable of handling heavy cutting applications.
  • 3/16" Round stump jumper - Standard thick stump jumper material keeps damage to a minimum.
  • 5 Year gearbox warranty - Shows confidence in gearbox integrity
  • 5-Bolt hubs - 5-Bolt hubs makes the wheel assembly more durable and longer lasting
  • 6" Blade overlap - Eliminates skipping during turns.
  • Cat. 5 intermediate & Cat. 4 wing drivelines with slip-clutches - Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under load instead of twisting the driveline.
  • Enclosed front to rear dual leveling rods - Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain.
  • Factory assembled-Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
  • Gearbox seal protection; Gearbox bottom seal protection for longer bearing life.
  • High Blade tip speed - 15,000 FPM Wing RC3615 - 15,268 FPM Center RC3615 - Allows clean cutting of material.
  • Hinged wing sections - Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • Input Driveline: Cat. 6 CV or Cat. 5 Conventional - Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Left wing rotates clockwise - Better discharge of material. Picks up tractor tracks.
  • Low tongue weight; Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
  • Narrow tongue construction; Allows for a tighter turning radius.
  • Replaceable wheel spindles - Wheel spindles can be replaced when damaged without replacing entire axle assembly.
  • Self-leveling hitch - Reduces drawbar wear by keeping hitch level while going through ditches.
  • Slip-clutch drivelines - Slip-clutches are designed to slip to minimize twist damage to the driveline profiles.
  • Smooth Top Design; Allows for easy cleaning of deck.
  • Spring cushioned center-axle - Protects unit from bumps and ground shock.
  • Surpassed rugged industry standards; All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures.
  • Wing transport locks - Wing transport locks securely hold the wings in the folded position in case of hydraulic failure.
Engine
  • Horsepower: (Min. PTO) 50 ; (Gearbox) 540 RPM or 1000 RPM/160 HP Divider/110 HP Center & Wings
Transmission
  • Driveline: (Input Driveline 540 & 1000 PTO) ASAE Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint ; (Intermediate & Wing Drivelines) Standard - Category 5 with Slip-Clutch ; Wing - Standard - Category 4 with Slip-Clutch
  • Gear Box: (Lubrication) Gear Lube 80-90W EP ; (Capacity) Splitter: 3.5 pints; Center deck & Wings: 6 pints
Chassis
  • Axle: (Transport) Spring-cushioned on center transport axle ; (Hubs) Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts
Dimensions
  • Blade Tip Speed: At 540 RPM Center Blades = 15,268 FPM & Wing Blades = 15,000 FPM ; At 1000 RPM Center Blades = 15,578 FPM & Wing Blades = 14,620 FPM
  • Cutting Capacity: 2 1/2”
  • Deck Height: 12”
  • Overall Length: Overall Length 15'-6" (With center deck raised fully up)
  • Weight: (Machine)-Hitch weight = 1,240 lbs ; Total weight = 3,730 lbs.
  • Width: (Cutting) 15'-0" ; (Overall) 15'-9" ; (Minimum Transport) 7'-11 3/4"
General Information
  • Cutting Height: 2” - 14”
  • Deck Material: (Thickness) 10 gauge ; (Side Skirt Thickness) 1/4"
  • Hitch: (Weight) 1,240 lbs. ; (Types) Standard Clevis, Double Swivel Clevis, Bar-Tite, or Pintle Hitch ; (Jack) - Standard (5,000 lbs.)
  • Lift: (Hydraulics) 3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
  • Number of Blades: 6 (2 per Carrier) 1/2” x 4” Heat Treated/Free Swinging Alloy Steel with Uplift ; (Overlap) 6" ; (Bolt) Keyed with hardened flat washer & lock nut ; (Stump Jumper / Blade Holder) 3/16" Thick round dish shaped pan, reinforced with 1" x 4" blade bar
  • Number Wheels: 6-Wheels: 6 - Wheels: 4 on transport axle and 1 on each wing axle
  • Skid Shoe: Wing Deck: 1 Replaceable shoe per wing ; Center Deck: 2 Replaceable shoes
  • Standard: (Hitch Type) Clevis ; (Hitch Jack) 5,000 lbs. ; (Intermediate & Wing Drivelines) Category 4 with Slip-Clutch ; (Color) Beige
  • Warranty: Overall Unit and Driveline: One year Parts and Labor/Gearbox: 5 years on Parts and Labor/Hydraulic Cylinders: One year Parts and Labor/Hoses and Seals: Considered wear items/Blades, tires and driveline friction discs: Considered wear items (see complete Warranty Statement).
  • Wings: (Wing Hydraulics) 2 1/2" x 12" hydraulic cylinders, hoses & fittings ; (Wing Transport Protection) Wing Transport Locks

Specs

General

Width
(Cutting) 15'-0" ; (Overall) 15'-9" ; (Minimum Transport) 7'-11 3/4"
Weight
(Machine)-Hitch weight = 1,240 lbs ; Total weight = 3,730 lbs.
Recommended HP
(Min. PTO) 50 ; (Gearbox) 540 RPM or 1000 RPM/160 HP Divider/110 HP Center & Wings

Related Products