2018 Land Pride DBM2660 Ditch Bank Cutter

Call for Price

Land Pride
DBM2660 Ditch Bank Cutter



  • Tractor HP Range: Designed for 75-150 HP tractor with minimum weight of 7,000 lbs.
  • Gearbox HP Rating: 150 HP
  • 3 Point Design: Does not require a dedicated tractor. Three point hook up is easy to hook up and remove from tractor.
  • Cutter Deck Visibility: Visibility of the cutter deck is captured from the operator’s seat. Easy to see operation. Operator does not have to look behind.
  • Factory Assembled: Arrives ready for the customer, saves time and money. (Excluding gauge wheel options and fluids.)
  • Grease Ports: All grease ports are easily accessible for servicing.
  • 10' Transport Width: Folds up close to the tractor. No weight brackets or decks hanging away from the tractor. Typically, not much wider than the tractor, which means safer transporting.
  • Extension Arm Design: One cylinder used to adjust extension arm horizontally 32" is easy to operate.
  • Long Horizontal Reach: Good access for reaching vegetation far away from the tractor.
  • Above Grade Vertical Reach: Good access for reaching up embankments and cutting low over hanging limbs.
  • Below Grade Reach: Good access for reaching down embankments.
  • 175 Degree Deck Rotation Angle: Cutter head can be positioned to reach different angles.
  • Cat. 2 & Cat. 3 with Quick Hitch 540 rpm or 1000 rpm: Fits a wide variety of tractors.
  • 35 Gallon Oil Reservoir: Large reservoir maintains optimum fluid temperatures and also serves as counterweight.
  • 1" Cutting Capacity: Good for trimming brush.
  • High Blade Tip Speed: 15,600 FPM tip speed means cleaner cutting.
  • One Parking Stand: Easy to adjust 3-point hitch level for unhooking tractor.
  • In-line Filter: Cleans hydraulic fluid before it re-enters the reservoir.
  • Shut-off Valve: Permits maintenance with minimum oil loss.
  • Built-in Auxiliary Weight Rack on Left Side: Suitcase weights can be added to left side for balance. Able to choose the weight bracket to match various types of suitcase weights.
  • Oil Pressure Gauge: Easily monitor oil pressure for optimum performance of unit.
  • Pressure Relief Valve: Protects against high hydraulic fluid pressure.
  • Gauge Wheels Option: Deck floats on gauge wheels eliminating frequent deck positioning and vigilant watch for changes in ground contour under the tractor and/or deck.
  • SMV Mounting Socket (Standard): SMV mounting socket receives most SMV signs equipped with a mounting blade for ease of attachment and removal when transporting on a truck or trailer.
  • SMV Sign (Accessory): SMV sign is offered as an accessory when the tractor’s SMV sign and mounting blade does not fit the cutter’s standard SMV mounting socket.
  • Tractor horsepower: 75 Minimum hp and 150 maximum hp.
  • Minimum tractor lift capacity: 2,500 lbs
  • Minimum tractor weight: 7,000 lbs without added weights
  • Weight: 1,792 lbs (With front & rear chain guards, side gauge wheel, Ditch Bank mounted speed increaser, & Case weight hanger. Without fluid in reservoir)
  • Hitch type: Cat. ll or Cat. ll/lll Quick Hitch. Clevis style lower hitch.
  • Tractor PTO speed: DB2660 = 540 rpm; DBM2660 = 1000 rpm
  • Cutting width: 58"
  • Transport width, minimum: 10' - 1" (without gauge wheels)
  • Overall width (fully retracted with optional weight bracket): 10' - 3 3/4"
  • Minimum cutting height (Deck level): 2" Minimum; Maximum is dependent upon 3-point lift height.
  • Horizontal cutting extension: 32"
  • Maximum horizontal reach from center of tractor: 13’-2"
  • Deck rotation: 85° up, 95° down
  • Blade tip speed: 15,600 FPM
  • Number of blades & size: 2, 1/2" x 4"
  • Blade rotation: Clockwise
  • Blade bolt: 1 1/2" With keyway, harden flat washer, and lock nut
  • Dishpan: 3/16" X 21" Round, dish-shaped
  • Cutting capacity: 1" Max.
  • Deck thickness: 10 GA
  • Side skirt thickness: 3/16"
  • Speed Increaser fluid capacity: Tractor mount: BIMA = 1 1/2 pints; Comer = 2 pints; Ditch Bank mount: BIMA = 2 pints; Comer = 1 pint
  • Speed increaser fluid: 80-90W EP Gearlube
  • Hydraulic fluid: Mobilfluid 424 (For alternate fluids, search on the web for “Mobilfluid 424” or go to www.mobil.com)
  • Reservoir capacity and filter: 35 Gallons / conventional 10 micron filter
  • Method to check oil capacity: Dipstick
  • Hydraulic fluid flow rae: 15 GPM (approx.)
  • Overload protection: Hydraulic relief valve
  • Driveline (optional): ASAE category 4
  • Skid shoes: 2 1/2" Wide x 1/4" thick & replaceable
  • Gauge wheel (optional): 4 x 8 Laminated tire with greasable caged roller bearings.
  • Gauge wheel adjustment: Manual
  • SMV Sign (Accessory): SMV decal on galvanized steel back sign and plated or galvanized blade mount.



Working Width
58 in.
10 ft. 1 in.
1,792 lb.
Recommended HP
75-150 hp

Related Products