2018 Land Pride RC4620

Call for Price

Land Pride



Land Pride is pleased to introduce our new 20-foot RC46 Series Rotary Cutter to complement our broad line of folding cutters. This new cutter, also available in a single wing, 14-foot and 1000 RPM models, is designed for use in contract- and municipal mowing applications. Right of ways, roadsides, pastures, open areas, and row crop fields are all candidates for this heavy-duty cutter.

  • Surpassed rugged industry standards: All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13.
  • Factory assembled: Saves customer set-up time and money. Adjustments should always be made by dealer.
  • 7 Year gearbox warranty*: Shows confidence in gearbox integrity. Years 6 & 7 parts only
  • 250 HP divider gearbox; 210 HP center & wing gearboxes: Rugged heavy-built gearboxes capable of handling heavy-cutting applications.
  • Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
  • 2 3/8" Output gearbox shaft: Large output shaft handles shock loads better.
  • Input driveline: Cat. 6 CV: Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Easy greasable drivelines: Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
  • 4 Plate slip-clutch: Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
  • High blade tip speed: Allows clean cutting of material & even distribution. See Specifications for actual FPM.
  • 6" Blade overlap: Eliminates skipping during turns.
  • Good cutting capacity: Can cut brushy areas with saplings up to 3".
  • 13" Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
  • Diamond shaped blade holder: Heavy diamond shaped blade holder for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions.
  • Optional dishpan: Dishpan provides extra protection against stumps and other protrusions. Excluding the dishpan eliminates grass/dirt buildup which can cause vibration.
  • Spindle Nut Protected: Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects.
  • Shredder Blade Kit (Optional): Ideal for cutting residue into smaller pieces. Replaces standard blade bar/dish configuration.
  • 10 gauge smooth deck top: Reduces accumulation of debris and is easier and faster to clean.
  • 1/4" side skirt: Reduces debris piercing possibilities.
  • Self-leveling hitch: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Hinged wing sections: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • 1" Solid hinge rods: Larger diameter hinge gives greater strength to cutter and hinge area.
  • Wing transport locks: Holds transport wings in the folded-up position in case of hydraulic pressure loss.
  • Enclosed front to rear dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
  • 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
  • Spring-cushioned center axle: Protects unit from bumps and ground shock, cushions loads on drawbar.
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
  • Rephasing lift cylinders: Allows cutter to be leveled using hydraulic cylinders versus mechanical turnbuckles.
  • 7/8" Leveling rods: Large diameter leveling rods provide superior supporting strength over rough terrain.
  • LP Performance Hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
  • Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • Roadway light kit option: Allows operator to transport on public roads safer when headlights are turned on and/or when flasher lights are turned on.
  • Wheel options: Laminated tires: Eliminates flats: Air-filled tires: Give better cushion while transporting; Foam-filled tires: Give better cushion while transporting & can’t go flat.
  • Deck rings (optional): Keeps blades from damaging the deck.
  • PTO Horsepower: 70 to 250 HP
  • Gearbox Horsepower: 250 HP Splitter; 210 HP Center & Wing
  • Gearbox Oil Capacity: 6.2 Pints: Divider Gearbox; 4.7 Pints: Center deck, LH deck & RH deck spindle gearboxes
  • Gear Box Lubrication: Gear Lube 80-90W EP
  • Cutting Capacity: 3"
  • Weights: Total Machine: 6,540 lbs. (Front & rear single chain guards, 6 - AC/FF tires, CV Driveline, standard clevis, & diamond blade bar with dishpan)
  • Weights: Tongue Weight: 2,160 lbs
  • Blade Tip Speed RC4620: Up to 17,000 FPM
  • Hitch Types: Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
  • Hitch Jack: Standard (7,000 lbs.)
  • Cutting Width: 20' - 0"
  • Overall Width: 21' - 0 1/2"
  • Minimum Transport Width: 9' - 11" (With cutting height at 2")
  • Overall Length: 17' - 8 1/2" (With cutting height at 2")
  • Deck Height: 13"
  • Cutting Height: 2" to 12"
  • Lift Hydraulics Center Deck: 3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers.
  • Lift Hydraulics Right Wing: 3" x 8" Rephasing hydraulic cylinder with hoses & fittings.
  • Lift Hydraulics Left Wing: 2 3/4" x 8" Rephasing hydraulic cylinder with hoses & fittings.
  • Wing Folding Hydraulics: Two 3" x 12" single-acting hydraulic cylinders complete with hoses & fittings.
  • Wing Flex: 45° up, 20° down while cutting.
  • Deck Material: 1 - Piece, 10 gauge.
  • Side Skirt Material: 1/4" plate.
  • Skid Shoes Wing Deck: Reversible & Replaceable: 2 straight skid shoes and 2 AR400 leading skid shoes.
  • Skid Shoes Center Deck: Replaceable: 2 skid shoes
  • Six Blades (2 per Carrier): 1/2" x 4" Heat treated free swinging alloy steel with up lift.
  • Blade Overlap: 6"
  • Blade Bolt: Keyed with hardened flat washer & lock nut.
  • Stump Jumper / Blade Holder: Standard: 1" Thick diamond blade bar; Optional: 1" Thick diamond blade bar with round dishpan; Optional: Shredder kit
  • Shredder Blade Kit (Optional): Double stacked 1/2" x 4" heat treated free swinging alloy steel blades with up lift on the bottom and 1/2" x 4" heat treated free swinging flat alloy steel blades on the top.
  • Deck Ring (Optional): 3/8" formed and welded.
  • Front & Rear Guards: Single chain or double chain.
  • Input Driveline: ASAE Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
  • Intermediate & Wing Drivelines: Cat. 5 with slip-clutch
  • Tire Options: 6" x 9 x 21" Laminated tires; 29" x 9" Used aircraft tires without foam filling; 27" x 7.75" Used aircraft tires with foam filling
  • Number of Wheels: 6 - Wheel option: 4 on transport axle and one on each wing axle; 8 - Wheel option: 4 on transport axle and two on each wing axle.
  • Standard Transport Axle: Spring-cushioned on center transport axle.
  • Axle Fasteners: 1 1/4" Greasable pins
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
  • Standard Color: Beige
  • Optional Colors: Red, Green, or Orange



Working Width
20 ft.
21 ft. 1/2 in.
17 ft. 8 1/2 in.
6,540 lb.
Recommended HP
70-250 PTO hp

Related Products