2018 Land Pride RCF3672

Call for Price

Land Pride



The Land Pride RCF36 Series Rotary Cutter is a brute, featuring a 190 HP gearbox capable of cutting heavy grass and weeds, row crop stubble, thick brush, and small trees up to 4" in diameter. The RCF36 has a smooth top design and offers a 2" to 12" cutting height range. These units come equipped standard with a 3/16" thick x 30-7/16" diameter heavy-duty stump jumper and replaceable bolt-on skid shoes. Safety guards for the front include rubber deflector, single chain guard or double chain guard options; rear options include either single- or double-chain guards or band.

  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
  • 5 Year gearbox warranty: A rugged heavy built gearbox capable of handling heavy cutting applications. Shows our confidence in the gearbox integrity.
  • 190 HP gearbox: A rugged heavy built gearbox capable of handling heavy cutting applications.
  • Cat. 5 driveline with 4-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
  • Dual position clevis type 3-point floating top link: Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with shorter top links.
  • Lower clevis type 3-point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • Heavy deck construction with 3/16” deck top & 1/4” side skirts: Strong heavy deck material for rugged use.
  • Box tubing deck supports: Makes for a stronger rigid deck.
  • Fully welded deck: Adds additional strength.
  • Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
  • 13 3/8” Deck Height: Allows cutter to handle heavy cutting conditions.
  • 2” to 12” Cutting height: Provides for a wide range of cutting conditions.
  • High cutting capacity: Can cut brushy areas with saplings up to 4”.
  • Skid shoes: Provides sidewall reinforcement and protection to bottom of sidewall.
  • 1/2” x 4” Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
  • Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
  • 3/16” Plate stump jumper: Standard round stump jumper slides over stumps, rocks and debris.
  • High blade tip speed: Ensures clean cut.
  • 15”Laminated tailwheel: Laminated material is long lasting in rough conditions and can’t go flat.
  • 1 1/2” Heavy-duty spindle on tailwheel: Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
  • Optional Guarding: Protect against flying debris. Customer can choose to include single chain, double chain or rubber guarding on the front and single chain or double chain guarding on the back.
  • Machine Weight: 1337 lbs. with front and rear single chain guards
  • Hitch: Category l or II with Floating Clevis Top Link, Quick Hitch Adaptable
  • Cutting Width: 72 in.
  • Overall Width: 78 1/2 in.
  • Overall Length: 124 3/4 in.
  • Deck Height (Bottom of Deck to Bottom of Skid Shoe): 13 3/8 in.
  • Cutting Height: 2 in. to 12 in.
  • Cutting Capacity: 4 in. Diameter
  • Recommended Tractor PTO HP: 60-190 HP
  • PTO Speed: 540 rpm
  • Gearbox: 1:1.48 Speed-Up Beveled Gears, Cast Iron Housing, 1 3/4 in.-20 spline input shaft and 2 3/8 in. output shaft
  • Gearbox Lubricant: EP 80-90W oil
  • Gearbox oil Capacity: 10 pints
  • Deck Construction: All Welded Deck
  • Deck Material Thickness: 3/16 in.
  • Side Skirt Material Thickness: 1/4 in.
  • Skid Construction: Replaceable bolt on skid shoes
  • Stump Jumper: Round Pan 3/16 in. x 30 7/16 in. with Blade Holder Bar
  • Blades (2): 1/2 in. x 4 in. Heat Treated Alloy Steel Free-Swinging High Lift - Low Friction
  • Blade Bolts: Keyed with harden flat washers & lock nuts.
  • Blade Tip Speed: 14,861 fpm
  • Driveline: ASAE Category 5 with 4-plate Slip Clutch
  • Driveline Protection: Center Bolt 4 plate Slip Clutch
  • Tailwheel Mount Assembly: Welded A-arm and Caster Fork with 360 degree swivel
  • Tailwheel: 4 in. x 8 in. x 15 in. Laminated Tire with cast iron hub
  • Front Guard: Optional: Rubber Belting or Single Chain Guard or Double Chain Guard
  • Rear Guard: Optional: Single Chain Guard or Double Chain Guard



Working Width
72 in.
78 1/2 in.
124 3/4 in.
1337 lb.
Recommended HP
60-190 PTO hp

Related Products